| Product Name | TILE-ONE SJ EA-2000(High elasticity tileadhesive)고탄성1액형 타일접착제) | ||
|---|---|---|---|
| Product Code | 81010-CON-006 | ||
| Feature | - Eco-friendly products (no added environmental hormone harmful to human body. - No peeling (detachment) occurs. - Superior water resistance and cracking inhibition. - No whitening due to mortar use, no scattering of dust. - It is possible to increase the efficiency of construction and shorten the construction time. (Excluding simple construction and line work) |
||
| Use | - Various boards for concrete, mortar, gypsum board, etc. - Applicable tile: Polishing, magnetism and stone tile etc. Interior and exterior wall and floor construction area - Construction site * Stable tile bonding in response to torsion of plywood etc. * Waterproofing of swimming pool, bathroom, etc. * Non-absorbent (steel plate, sandwich panel, tile) * Construction of special material tiles such as highly absorbent tiles and flexible boards * Various large tiles and ceramics panel, stone adhesion, floor heating flooring |
||
| Color | - White, gray, color (Please order separately for other colors | ||
| Spec & Packing Unit | 500ml SSG, 12gk/PVCcan | ||
| MFG/Country of Origin | SAMJUNG / KOR | ||
| Hazard pictogram |  |
||
| Sales Unit | 500ml SSG, 12gk/PVCcan | ||
| Unit price | Consultation on purchase (VAT is a separate price [10%]) | ||
| Logistics fee | Please contact us. | ||
| SNS Share | |||
| Product Name | CHEMDYNE CD-5000 (Tile Bond for Interior) 17kg | ||
|---|---|---|---|
| Product Code | 81005-CON-005 | ||
| Feature | - It is easy to apply with acrylic one-component tile adhesive and has good adhesion. It can be used on concrete base and tile on tile. |
||
| Use | - Adhesion of inner wall tiles (Ceramic tile inner wall construction of 300x600mm or less) - Restricted use place : Outside of the building where there is moisture, indoor floor (toilet, kitchen etc.) |
||
| How to use | 1. Apply adhesive over the tile. - Clean the surface thoroughly. - The optimal temperature for the surface is 5 ~ 25℃. - Apply the adhesive to the unevenness of about 7㎜ (standard usage: 2.5 ~ 3kg / ㎡) and finish tiling within 20 minutes. 2. Tile attachment. - Apply enough pressure to glue the backside of the tile and gently tap it with a rubber mallet if necessary to ensure smoothness of the work surface. - Use joints to prevent defects caused by contraction or expansion of the material. |
||
| Precautions | - Attach the tiles within 20 minutes (before the film is formed) after applying the adhesive. - The time available for bonding depends on the condition of the substrate, the coating thickness, and the workplace conditions. Also, if you stick it mmediately after film formation, it will cause tiles to fall off. - Adhesion may be difficult if the product is applied thickly. - Shock, freezing and water penetration during curing will cause tile to fall off. - Do not use on the outside of the building, on the ceiling, on the floor. - Do not use on indoor floors (toilet, kitchen), swimming pool, public bath, shower booth, washbasin and so on. - Do not use on sandwich panel, MDF, PB, steel plate, etc. - Do not use on porcelain tiles (tiles with less than 1% absorbency). - Please consult with us when constructing plywood, OSB board, magnesium board, paint board and special base board. - Store at least 5℃ (to prevent freezing) from direct sunlight during storage. - Be sure to apply by pressing method.(Do not use other methods such as floating.) - Please refer to Usage and Precautions before using the product. When changing working conditions (adherend material, new material, environment, etc.), bad adhesion and property change may occur Please consult with our technical staff before use. |
||
| Spec & Packing Unit | 17kg/Bulk | ||
| MFG/Country of Origin | CHEMGUARD / KOR | ||
| Hazard pictogram | |
||
| Sales Unit | |||
| Unit price | 27USD/Can (VAT is a separate price [10%]) | ||
| Logistics fee | Please contact us. | ||
| SNS Share | |||
| Product Name | RUST KILL/High performance rust removal CR-550 5kg | ||
|---|---|---|---|
| Product Code | 80925-CM-004 | ||
| Feature | - RUST KILL CR-550 is a liquid compound specially prepared to dissolve metal oxide layer without rusting while removing rust. It is a high-performance rust remover that is safer, more efficient and quickly removed than conventional inorganic acids (hydrochloric acid, sulfuric acid, nitric acid). - The range of products is varied and is deoxygenated to the original color. - It removes rust, carbon, pollutants and oxides quickly. - There is little damage to the base material and it exerts the best effect even in fine grooves and cracks. - Maximum effect when used at room temperature. - It is easy to use various working methods such as dipping and spraying. |
||
| Use | - Removal of rust in repair and maintenance of automobiles, heavy equipment, agricultural machinery, etc. - Rust removal of precision machinery parts, piping, storage tanks, railway car maintenance and equipment when repairing various ships. - Rust removal of industrial machine parts, tools, molds, bearings, etc. |
||
| Points?to?note?when?using | - When using the product, avoid contact with the skin if possible and wear protective equipment. - When spraying, please use it lean against wind. - Please clean your skin after using the product. - Please read the Material Safety Data Sheet (MSDS) before use. |
||
| How to use | - Oil or grease that is contaminated with the target metal may interfere with penetration of the liquid, so remove it before working. - It can use to be diluted 1 ~ 3 times with the original solution depending on the degree of rust generation and the operation speed. - After use, please rinse with water and rust-proofing separately. - It can be used by spraying, brushing, or dipping. |
||
| Spec & Packing Unit | 600gr*20EA/Box, 5kg*4EA/Box, 20kg PE Can | ||
| MFG/Country of Origin | CHEMGUARD / KOR | ||
| Hazard pictogram |    |
||
| Sales Unit | |||
| Unit price | 270USD/Box (VAT is a separate price [10%]) | ||
| Logistics fee | Please contact us. | ||
| SNS Share | |||
| Product Name | PERFECT PRIMER CPF-100 (Ground Reinforcing Agent) 18L | ||
|---|---|---|---|
| Product Code | 81005-CON-004 | ||
| Feature | CPF - 100 is a After curing concrete, it neutralizes with time, prevents deterioration of strength, deteriorates strength, and improves the strength of poorly densely packed surface to prevent moisture penetration. - Excellent in heat resistance, weatherability, freezing and solubility. - Excellent resistance to salt and alkali. - Plastering, concrete, excellent concrete and adhesion / harmless to concrete, inorganic and non-toxic. |
||
| Use | - Roof, warehouse floor, interior - For strengthening the floor before construction - For water-soluble primers |
||
| Precautions | 1. Dry the construction site as much as possible and avoid contact with water within 12 hours after installation. 2. Please do not apply more than 5℃ to 30℃. 3. Please be careful about freezing |
||
| How to use | 1. Clean the oil, moss and dirt on the construction site thoroughly. 2. Always use the original solution with a brush, roller or airless. |
||
| Spec & Packing Unit | 18L/Bulk | ||
| MFG/Country of Origin | CHEMGUARD / KOR | ||
| Hazard pictogram | |
||
| Sales Unit | |||
| Unit price | 36USD/Can (VAT is a separate price [10%]) | ||
| Logistics fee | Please contact us. | ||
| SNS Share | |||
| Product Name | PERFECT FOAM (Polyurethane)750ml/Can | ||
|---|---|---|---|
| Product Code | 81005-CON-003 | ||
| Feature | - Perfect Foam CT-800 is a single-component polyurethane foam that is sprayed into cans and hardened by humidity in the air. It has excellent foaming power and adhesion. - Workable temperature: Image 5 ℃ or more, Surface hardening time: 10 ~ 15 minutes - Cutting time: 40 to 60 minutes, Full curing time: 24 hours - Foaming capacity: 30 ~ 40L |
||
| Use | - Sealing and sealing around door frame, window frame - Gap filling etc. during various piping works |
||
| How to use | - Remove foreign matter (water, oil, dust) on the surface before use. - Shake enough cans up and down before use. - Attach the spraying straw or gun to the valve of the can. - It will expand about 40% when it is applied. After use, clean the spray straw or gun with Foam Cleaner (CC-303). - After 2 hours of use, it hardens and becomes fully cured after 24 hours. - After fully cured, clean the surface with a knife, saw, etc., and finish by painting or coating |
||
| Spec & Packing Unit | 750ml*15EA/Box | ||
| MFG/Country of Origin | CHEMGUARD / KOR | ||
| Hazard pictogram |   |
||
| Sales Unit | |||
| Unit price | 42USD/Box (VAT is a separate price [10%]) | ||
| Logistics fee | Please contact us. | ||
| SNS Share | |||
